The ipx34 rain test chamber, also known as the "waterproof test device", is one of the enclosure protection grades, IPX34 (classes are divided into outward opening and box enclosed), and the protection waterproof grade is suitable for external lighting, signal devices and automotive lamps Shell protection can provide realistic simulation of various environments such as water and spray tests that electronic products and their components may be subjected to during transportation and use. In order to detect the waterproof performance of various products.
The ipx12 test chamber shell protection waterproof grade is suitable for external lighting and signal equipment and automobile lamp shell protection. It can truly simulate the various environments that electronic products and their components may be subjected to during transportation and use.
The IPX56 strong water spray test chamber is suitable for the evaluation of the protection level of the enclosures of electrical appliances and electronic equipment, and tests the harmful effects of water into the enclosures on the equipment, so as to detect the waterproof performance of the enclosures.
The IPX7 water immersion test device has special requirements for various waterproof and anti-leakage products and equipment to evaluate its water resistance or sealing ability. It has the characteristics of large test space and simulated environment.
The IPX8 waterproof test chamber is mainly used to test the pressure resistance of the sample under pressure to ensure that the sample is under the specified water pressure state and will not cause water ingress or damage due to pressure.
The IPX9k waterproof test chamber is mainly suitable for the waterproof detection test of electrical appliances and auto parts under high temperature and high pressure spray conditions.
The test chamber consists of a heating water tank, a high-pressure plunger pump, a high-pressure solenoid valve, a fan nozzle, a turntable, etc. During the test, the water in the water tank is heated to the specified temperature, the sample is installed on the turntable, the nozzle position is adjusted, and the equipment is closed. Protect the door, set the test data, start the equipment to test
During the test, the four nozzles sprayed in turn for 30 seconds, the test water can be recycled, and the equipment test can be continuously tested for 8 hours.