Operation of constant temperature and humidity box you have to pay attention to what matters

NOKI Chamber pm9:20

How much do you know about the operation of the constant temperature and humidity chamber to know? Let’s take a look at the following!

1. In order to avoid the constant temperature and humidity test chamber machine failure, please provide the power supply within the rated voltage range.

2. In order to prevent electric shock or misoperation and failure, please do not turn on the power before the end of installation and wiring.

3. This product is non-explosion-proof, please do not use the constant temperature and humidity machine in a bad environment with combustible or explosive gas.

4. Please do not open the door of the test chamber as far as possible during the work of the apparatus, high temperature open may cause burns to the operator, low temperature open may cause frostbite to the staff and may cause the evaporator to freeze, affecting the cooling effect. If you must open, please do a certain amount of protection work

5. Prohibit unauthorized disassembly, processing, transformation, or repair of constant temperature and humidity machine, otherwise, there will be abnormal action, electric shock, or the risk of fire.

6. The ventilation holes of the body need to be kept clear to avoid malfunction, abnormal action, reduced life, and fire.

7. If the machine is found to be damaged or deformed when opening the box, please do not use it.

8. When the machine is installed and set up, be careful not to let dust, wire, iron filings, or other things enter, otherwise wrong action or malfunction will occur.

9. Wiring must be correct and must be grounded. No grounding may cause electric shock, wrong action accident, display abnormal or measurement with large error.

10.Check the terminal screws and fixing the bracket regularly.

11.During the operation of the instrument, the power inlet terminal cover must be installed on the terminal block to prevent electric shock.

12. Before modifying the setting, signal output, start, stop, and other operations during operation, the instrument should be operated with full consideration of safety.

13. Please use a dry cloth to wipe the instrument, do not use alcohol, gasoline, or other organic solvents, do not splash water on the instrument, if the instrument is immersed in water, please stop using it immediately, otherwise, there is a risk of electric leakage, electric shock or fire.

14. The internal parts of the instrument have a certain life span, in order to use the instrument continuously and safely, please carry out maintenance and repair regularly. If you dispose of the product, please dispose of it as industrial waste.

15. Check whether the power supply of the constant temperature and humidity tester is stable before starting the machine.

leave message now