Humidification method and the principle of the intelligent artificial climate chamber

NOKI Chamber pm4:34

With the vagaries of agricultural weather and the scientific development of agricultural instruments and equipment, more and more precision instruments are widely put into use in agricultural production, which greatly improves the efficiency of climate environment calibration work and thus better serves agriculture. An intelligent artificial climate chamber is a kind of climate test chamber that can ideal artificial climate experimental environment climate environment, which plays an important role in the work of seed germination and plant breeding.

Generally, common climate test chamber humidification methods are the steam humidification method, water spray humidification method, surface evaporation humidification method. Among them, the steam humidification method mainly refers to humidification through electric heaters or electrodes and high-pressure steam spray humidification, these two humidification principles are different, but the humidification effect is the same; water spray humidification method is the use of ultrasonic type, centrifugal spray, and water pump spray to achieve efficient humidification, while the surface evaporation humidification method is the use of shallow water tray for humidification.

The above humidification methods are actually mainly used to get can play a better effect, however, for medium and small climate test chambers, shallow water tray humidification should be used, because its structure is more simple, reliable, no noise, and also able to reduce humidity.

Topunnong’s RTOP-B/D series of intelligent artificial climate chamber uses shallow water tray humidification, which not only has high control accuracy and can control the humidity inside the chamber at ±5%RH (when the relative humidity is greater than 70%RH) but also its operation is very convenient and very suitable for the study of climate conditions for the seed germination test.

The intelligent artificial climate chamber is a high-precision hot and cold constant temperature equipment with light and humidification functions, providing users with an ideal artificial climate experimental environment. It can be used for plant germination, seedling, tissue and microorganism cultivation; insect and small animal feeding; determination of BOD for water analysis, and artificial climate test for other purposes. It is the ideal test equipment for production and scientific research departments of biological genetic engineering, medicine, agriculture, forestry, environmental science, animal husbandry, aquaculture, etc.

Product features

●Original international brand compressor ensures long time continuous operation of the test equipment, environmentally friendly refrigerant (R134a), high efficiency, low energy consumption, promoting energy saving.

●Microcomputer program control of temperature and illumination can simulate the temperature and humidity changes during the day and night, and it can also choose the light source with a sufficient and stable growth environment.

●The 30-segment program can be set, each segment setting time range 1-99 hours (optional), different segment parameters can be set to meet different parameters of plant growth.

●With power-down memory function, which ensures that the instrument can continue to run from the breaking point after power on.

●Constant temperature control system with fast response and high accuracy of temperature control.

●Adopt ultra-microwave humidification, reliable humidification, and uniform humidity.

●Ducted ventilation, soft wind speed in the studio, uniform temperature.

●Aluminum alloy frame, light and beautiful, no rusting.

●Adopting mirror stainless steel inner liner with the semi-circular transition of four corners, the partition bracket can be freely loaded and unloaded, which is convenient for cleaning work in the box.

●With over-temperature and sensor abnormal protection function, and with independent air duct over-temperature protection device, double protection.

●It can be connected with an RS485 interface and computer to monitor the experiment process or record the experiment data through the computer synchronously. (Optional)

●Can be equipped with additional: with a CO2 air inlet (to promote plant growth) and CO2 controller (imported infrared CO2 sensor)

Application areas of the intelligent artificial climate chamber

The instrument uses an artificial climate to provide an ideal environment for various biological experiments. Artificial climate refers to the artificial creation or supplementation of some conditions so as to induce the climatic conditions in the local range in the direction that people want. The intelligent LCD artificial climate chamber can control temperature and humidity as well as light manually, which is especially suitable for use in all kinds of biological research experiments, such as plant seedling cultivation, seed germination, small animal rearing, etc.

The intelligent artificial climate chamber adopts a microcomputer automatic control, which can regulate temperature, humidity, light, and other environmental parameters to provide users with an ideal artificial climate experimental environment. At the same time, it has ultra-temperature and sensor abnormal protection functions to ensure the safety of the instrument and samples.

The instrument is selected with a full-spectrum plant growth light, which is beneficial to plant growth and improves plant disease resistance. The instrument can be used for plant germination, seedling, tissue and microorganism cultivation; insect and small animal feeding; BOD determination for water analysis, and artificial climate tests for other purposes. It is the ideal test equipment for production and scientific research departments of biological genetic engineering, medicine, agriculture, forestry, environmental science, animal husbandry, aquaculture, etc.

The artificial climate chamber should not be tilted more than 45° when handling, otherwise, it is easy to damage the refrigerator inside the chamber, the instrument should be far away from electromagnetic interference, and at the same time to ground the instrument when it is energized. Humidifier Must use distilled water or pure water, whenever the water tank from the base must be poured out of the water on the base, the irrigation hole cover of the instrument should be sealed, with no dripping water. Instrument studio on the left and right sides of the space against the wall for the air duct, do not occupy the air duct when you put things, so as not to cause poor ventilation and uneven temperature.

leave message now